for resilient and rigid females
![]() |
![]() |
||
vks-oc-rs f 2.2. mm Abutmentf 4 mm, distance height 2 mm46000042 |
vks-oc-rs f 2.2. mm Abutmentf 5 mm, distance height 2 mm46000052 |
vks-oc-rs f 2.2. mm Abutmentf 6 mm, distance height 2 mm46000062 |
vks-oc-rs f 2.2. mm Implant Analoguef 4 mm46000004 |
![]() |
|||
vks-oc-rs f 2.2. mm Abutmentf 4 mm, distance height 4 mm46000044 |
vks-oc-rs f 2.2. mm Abutmentf 5 mm, distance height 4 mm46000054 |
vks-oc-rs f 2.2. mm Abutmentf 6 mm, distance height 4 mm46000064 |
vks-oc-rs f 2.2. mm Implant Analoguef 5 mm46000005 |
![]() |
![]() |
![]() |
![]() |
vks-oc-rs f 2.2. mm Abutmentf 4 mm, distance height 6 mm46000046 |
vks-oc-rs f 2.2. mm Abutmentf 5 mm, distance height 6 mm46000056 |
vks-oc-rs f 2.2. mm Abutmentf 6 mm, distance height 6 mm46000066 |
vks-oc-rs f 2.2. mm Implant Analoguef 6 mm46000006 |
![]() |
![]() |
![]() |
![]() |
Screwdriver is
elbow, 1 piece 46000010 |
Screwdriver is
manual, short, 1 piece 46000011 |
Angle measuring device
1 piece 46000100 |
vks-oc-rs f 2.2. mm Axle Abutment, 2 pieces46000102 |
Bredent Vario Snap vks-oc-rs
![]() |
![]() |
![]() |
|
After successful osseointegration of the implant, the mucous membrane is opened and the suitable vks-oc abutment is screwed in. The torque must be limited to 30 Ncm by using a vks-oc screwdriver. | Abutments in the distance heights of 2, 4 and 6 mm are available. Distance sleeves are not required. The stud abutments can also be used as gingiva former. Prior to taking the impression, place the transfer matrixes onto the stud abutments. | The transfer matrices are now in the total impression. Retention grooves ensure the firm position of the transfer matrices in the impression material. | Prior to the fabrication of the model, laboratory implants are inserted into the transfer matrices. This way precise transfer of the position of the implants is guaranteed. |
![]() |
![]() |
||
The model precisely shows the position of the implants. Normally the implants have not been inserted in an entirely parallel position to each other so that divergence or convergences between several stud abutments result. | The vks-oc system accepts maximum deviations of 15° to the planned angle of insertion. To determine from the vertical axle, axle abutments are placed onto the abutment analogue. | A special angle measuring device represents the range of tolerance of the vks-oc system. In this example the deviation of the implants lies within the range of tolerance. |
Resilient Resilient Rigidvks-oc Abutments can be supplied with rigid or resilient matrixes. matrixes can be integrated into a chrome cobalt framework or an acrylic denture. |